Do you think there would be much demand for a GUI? Maybe not to cover all functionality but the common things that trip up newbies? Might be a fun project to look at once I get through my backlog.
3 Likes
I ordered a suture kit so I could learn how to this kind of install, and wow are you talented. I’m sure it gets easier the more you practice, but obviously you’ve had a lot of practice. So bravo 
that’s a good looking stitch to have done with two hands, let alone one.
2 Likes
Just a simple PSA… be careful with sutures… it’s easy to get it wrong and cause more problems… using the wrong suture material (internal vs dermal) has been an issue even with body modders, and basically introducing more chance of infection from the suturing process itself… all concerns with sutures.
These are just a few of the reasons we design products with the aim to rid scalpels and sutures from all installation procedures.
8 Likes
You make a valid point. I think if anything a simple butterfly bandage would suffice, if even needed.
1 Like
I agree… as long as you can achieve complete hemostasis (stop all bleeding), then a quality butterfly (not a cheap shit one with bad adhesive) will suffice for more biohack installs. I also tend to further stabilize with film patch overtop… tegaderm makes some decent ones.
Any updates on flexM1?
I’m anxiously waiting on sending more 
to DT
2 Likes
yep… working on lining up production now. We have all the stuff we need now (finally!) and I just need to clear out my queue and get starting on a batch. Probably have some stuff up on the store next week!
7 Likes
I hadn’t thought about this much when I ordered my xM1, most hotels use battery powered readers. As hotel keys are my main use case for the xM1. Now this is an option maybe I should just skip the xM1 and get a flex instead.
Or I could just use both, but if I have a use case for 2 may as well get 2 flex.
On that note, is there anything that would technically stop the apex acting as a mifare classic 1k?
1 Like
So exciting!
Did you come to a final verdict on if you’ll sell the needles or if they’re going to be a partner only item?
And if partner only, any info on which partners got them? Needle seems like it would definitely be the more comfortable way to get an install since stitches kind of suck.
3 Likes
sorta… it has the emulation capability to act as a mifare classic 1k, 4k, plus 1k, plus 4k, desfire ev1 1k, 4k, 8… however… the utility of this is crap because you cannot control the UID… it uses a hard set prefix and dynamic suffix based on the host chip ID and some transform algo. In short, you can’t clone UIDs to the emulated iso14443a card type.
The other thing to point out about the flexM1s is that they will come in two flavors… gen1a and gen2… gen2 is very interesting because you can write an entire clone file to the gen2 card including all of sector 0 with your phone and the MCT app… so if you get some clone and key files together and store them on your phone you can easily switch up what is written to your flexM1 gen2 on an as-needed basis. Perhaps we could explore the source code for MCT and create an interlink with a common shared repo of clone files… like I have the keys and clone files for the Chuck E Cheese play pass card… the keys are the same for every single card… so while the clone file would not be something I would want to share, the key file would be… neat huh?
5 Likes
I need to go look into the pros and cons of the genA1 vs gen2 then I guess 
and maybe get both.
2 Likes
so right, with a gen 2 I could clone a card with my phone and mct and dump that to the xm1. But I don’t understand the difference … is it with the gen1 you have to give it a special command to change the uid whereas gen2 it is basically permanently “open” and a dogey write can kill it?
There are some good references around, In fact I think Amal MAY? have published one, Let me try and find something for you
2 Likes
Don’t get me wrong I have read everything I can find. Id just love to hear it, look at it this was I want to get a flexM1 so that when I stay at hotels I can use that as the card.
I don’t really like the risk at bricking the implant but if I need the gen2 that’s fine but as far as I have read the only time a brick can happen is on write and if I did a full clone and dump then that risk is mitigated.
That may be complete crap and please correct me if is.
EDIT: or even better get them to enrol the flex as the room key, boom no risk! Providing they don’t write to the card.
1 Like
So here is my simplified take
Both good options.
Both can do what you want
gen2 you have the convenience of writing to with your phone, but “risk” of bricking 
gen1a you need ProxMark to write with no risk of bricking
Thats my thoughts
For what it’s worth, I’ll be getting the gen2
4 Likes
Heres Amals Document, have you seen it before?
Does It anwser your question?
Just a little bit 
more detail than my post above
http://amal.net/wp-content/uploads/2012/11/NFC-Access-Control-for-Mifare-S50.pdf
1 Like
Oh boy. This is exciting.
My wallet is not so excited 
especially for my (I assume) massive installation cost for all the stuff in my pile… Otherwise yeah very exciting overall.
2 Likes
Yeah, don’t skip breakfast that day.
1 Like