Easy Guard : Push to start installation ( with easy removal option)

[Pilgrimsmaster]

@Necko

I wonder if there is something similar that can be installed on a motorcycle?

I will turn my reply into a Motobike mod thread, I have more to add, but in the meantime some light reading for you

HA
DAMN IT, @tac0s beat me to it…

oh well, blah blah, same below, and probably many double ups

---

You could probably make the Easy guard work, but there are alternatives

Indian Scout Bobber 2018 - Keyless Ignition

I just finished my Keyless Ignition and fuelpump security setup on my Indian Scout Bobber Motorcycle. I had some problems with the MO-Lock and my NExT RFID + NFC Chip Implant, i wasn’t able to turn on the MO-Lock, turning it off was not an issue. I cloned a EM4100 transponder to my implant with the Proxmark 3 and the ProxLF antenna for the Proxmark3 RDV4, it works perfect with a pretty decent reader distance Thanks @Pilgrimsmaster for your hint I made a small vid…

Ideas for controlling locking mechanism on electric scooter?

Guys… honestly… just use the dpdt… it’s easy; [dpdt-relay] Here’s how you wire it up to be self-latching; [dpdt-latch] Basically you use one of the throws to self-latch, and the other to control whatever you want to control. The diode protects the XAC from current feeding back through the output wire and destroying the XAC. The switch should be the main power switch on the bike or scooter or whatever… so when you turn the main power switch on, the XAC gets power but the relay is dead. Once…

Help! I buy this m-Lock Motorcycle Key Replacement and I can't work it

@nanna has a post with a little hint, and her completed bobber project

xEM motorcycle wiring

Boys and girls, turkeys and squirrels, and everyone else I forgot… If I can get some time this weekend at home I plan on wiring up my xEM controller to the ignition on my Harley. Only thing I am not understanding is… If the controller acts as a trigger, what keeps the circuit complete to let it keep running after you pull your hand away from the antenna?

Motorcycle Access Control Writeup

I thought this writeup might help some folks considering converting their motorcycle ignition switch to RFID control using the DT access controller. There are several different ways this has been done (search the forum), here is one method that was pretty simple for my Victory. In fact, I believe this same (or very similar) method was mentioned in this thread: Figure A shows a simplified version of how the bike was originally wired. The ignition switch had two contacts, the first key position…

What Tag/Transponder to ge for a Motogadget m.lock?

@Pilgrimsmaster I have recieved my Proxmark 3 and the LF antenna, compiled and installed the Iceman repo. Did an Em410x clone from a Chinese Em4100 transponder to my implant, and can now confirm the motor gadget is working 100% - happy me Thanks for your hint

RFID in motorcycle immobilisers

Thats not to say there aren’t other options to achieve what you want. [image]

Motorbike ignition

That’s a very cool project and can give you quite some entertainment! There are a few threads around the forum which can be nice for you. I can think of this one out of the top of my head, but sure @Pilgrimsmaster will be able to find you even more!

Arduino relay switch

Thought I’d share my first project. Very rough I know, but its just a prototype. Switching a relay with 5 second reset using arduino pro mini and my NExT. I didn’t write the code myself, just modified some I found online. Probably cost under ten pounds in parts. I’m pleased with how well it works.

Also some car projects will help because they are all the same principle.

Finally made my car implant compatible

So finally got around to wiring my car to the xEM controller. So because my car doesn’t like to play well with others I had to get a key-fob to use for the project The goal here was to be able to use a NExT to unlock my car. And to be as low profile as possible. Essentially nothing should be visible either inside or outside the car. I achieved this by connecting the xEM to my car ground and a unused fuse slot on the fuse box. the signal wire actuates a common automotive relay, The relay close…

F150 RFID push to start/door unlock

Hey all! I’ve successfully installed an easy guard RFID push to start on my truck. I am now on to tackling the door unlock. I have a compustar alarm system and looking at the master install guide, I should be able to turn on a setting that when a 12v pulse is sent to the wire, it’ll disarm the system and unlock the doors. I’d imagine this would be pretty simple to do with the access control unit on the site. I wondering if I am able to use the same fob with both? Also would I be able to slice in…

Car unlock and ignition advice

I don’t have any implants currently but I plan to get several. I’m planning on replacing the ignition switch on my Jeep (2007 grand Cherokee) soon and thought I might as well be thinking ahead. What should I be looking for in the new ignition system that will make it easier to set up later with an implant? I’m assuming I want a push button start. Anything else I should look for? Or advice in general for the project? Plan: rfid unlock (hand read through windshield prob) and rfid start (hand re…

This one covers easy guard and a few others

RFID Keyless Car Start Systems?

Have any of you tried any of the RFID keyless car start systems (like this)? It looks like scanning the RFID tag disarms the engine lock and then you’re able to use a button to start the car. It says it uses 125khz tags so I’d just have to check if it’s something the T5577 could emulate. I’m itching to use my NeXT for something and these look interesting… It seems like it would be a pretty cool (and affordable) car upgrade to use with our implants if the system works well.

Easy Guard : Push to start installation ( with easy removal option)

Easy Guard install [image] Webstore link * There are others with different names, or different wiring colours, but the principle remains the same One more use of the mighty T5577 I put an Easy Guard Push to start system in my car around 2 years ago, it has worked flawlessly, I also have a test rig on a bench and just yesterday I put another one into somebody elses car, so I documented it incase it could be of use to somebody else out there. The main consideration / benefit of this install …

If your bike has a proximity immobiliser installed, this workaround is a fantastic one

Using implant with factory keyless open and start

I got myself a car with keyless entry and pushbutton start. But carrying a fob is so 2010. Actually I’m really worried I’m going to lose it. It falls out of my pocket so easily. The idea is use an RFID access controller and build an interface between it and the fob The interface controller will control the power to the fob as well as the lock/unlock. A fob will need to be dedicated to it and be left installed in the car somewhere Challenges: The car senses when the (powered) fob is in th…

That should be more than enough to get you started